By Timothy Dale and Theresa Clement | Updated Nov 15, 2023 2:59 PM
We may earn revenue from the products available on this page and participate in affiliate programs. Magnetic Gas Valve
Photo: Elizabeth Cranston for Bob Vila
If you have a natural gas line running into your home, you need to know the location of your gas shut-off valves. A gas leak or a damaged gas line is an emergency situation that requires immediate action, and these emergencies are more common than you might suspect.
According to the American Chemical Society, there are about 630,000 natural gas leaks annually. While most of these are caused by excavation damage or mishaps like a car hitting the gas meter, one out of every five leaks is the result of incorrect operation, corrosion, or equipment failures.
You should shut off the main gas line to your home only in an emergency, such as when you smell gas, hear gas hissing, see a break in the gas line, or suspect a gas leak. In these situations, the first thing you should do is get everyone out of the house and call your gas company, and then shut off the gas only if you can safely do so.
Your home will have both main gas shut-off valves and individual shut-off valves for the furnace, stove, dryer, and other gas appliances. Before an emergency happens, make sure you know where in your home the gas shut-off valves are located and how to turn a gas valve on or off.
Shutting off the gas to a house is a serious undertaking, so shut off the gas main only if you absolutely must. Once you have turned off the gas to the house, do not turn it back on yourself. Contact the gas company to perform an inspection and safely restore service to the house. Opening the valve back up without fixing the problem (or opening it up too quickly) can result in damage, or create another problem altogether.
Photo: Elizabeth Cranston for Bob Vila
Depending on where you live and how old your house is, the location of the gas main will vary. You’ll usually find it on the side of the house. Larger structures may have more than one gas meter, in which case there should be a master valve that controls the flow of gas to the entire building.
Most homes will have two main shut-off valves: the street-side valve, which is owned by the utility company and is not intended for homeowner use, and the house-side valve, which is located inside the house and is owned and intended for use by the homeowner. Some older homes may not have a house-side valve.
RELATED: How to Turn Off Water to Your House
Again, don’t turn off the gas unless absolutely necessary. Turning it back on requires a visit from the gas company, and restoration of service may be delayed.
First, visually confirm whether the gas valve is open or closed by checking to make sure that the lever or nub is perpendicular to the gas line. Then, just in case the valve is faulty, listen for gas flow through the pipes. Check the pilot lights in older appliances to determine if they are still lit. (Newer appliances don’t have pilot lights, so they’re not useful for checking whether the gas is off.)
If you’re concerned that the gas isn’t truly off, call the gas company to have them come inspect the line. They will be able to determine whether the gas is off and diagnose issues with your system. Do not go back into the house until the gas company has inspected the line and determined that it is safe to enter.
Any time that you shut off the gas main, expect to be without gas for 1 to 2 hours, or longer. As we’ve said but bears repeating, never attempt to turn the main supply back on—call your gas company instead. They will be able to properly operate the valve, ensure that your system is safe by checking for leaks, and confirm that any gas appliances with pilot lights are safely relit.
There are a number of reasons why you may need to turn off the gas supply to a specific appliance:
Emergency tip: A gas-powered water heater can be a source of water if you’re hunkered down during an emergency. To access the water, first shut off the gas or electricity supply. Next, open the drain at the bottom of the water tank. Then, turn on a hot water faucet in the house. The air will go into the system, allowing the tank to drain. Collect the water in a container, and let it sit before using it so sediment settles.
If you have to evacuate, consider shutting off the gas to outdoor appliances and turning off any indoor thermostats for extra safety. It may be weeks before residents can return home after a natural disaster.
Each gas appliance should have a gas line running to it and a valve located just before the appliance. This valve, like the valves on the house-side main, can be shut off by rotating the handle until it’s perpendicular to the pipe.
For older appliances, you may need to relight the pilot appliances when the gas is turned back on. Follow the manufacturer’s guidelines, which may be printed right on the appliance. If not, go to the manufacturer’s website. If you are uncomfortable lighting the pilot, ask a professional for help.
RELATED: Solved! Who Installs Gas Lines for Stoves?
It’s important that you know now where your gas shutoffs are and how to operate them safely so you’ll be prepared when and if an emergency strikes. Keep in mind that if you do have to shut off the gas main, you must contact the gas company to turn it back on—do not try to do this yourself. And most important of all, if you smell gas in your home, the smartest and safest course is to get everyone out of the house and call 911 from a location that is safely removed from the house.
Articles may contain affiliate links which enable us to share in the revenue of any purchases made.
Registration on or use of this site constitutes acceptance of our Terms of Service.
Natural Gas Valve © 2024 Recurrent. All rights reserved.